How to affix car logos: hot topics and practical guides on the Internet
Recently, the discussion about car logo affixing has become a hot topic, especially new car owners and modification enthusiasts who are concerned about compliance and aesthetics. This article will provide you with structured data and practical guidance based on hot topics across the Internet in the past 10 days.
1. Ranking of recent popular car logo topics
| Ranking | Topic keywords | Search volume (10,000) | Main discussion points |
|---|---|---|---|
| 1 | New energy vehicle logo affixing specifications | 28.5 | The difference between green card and blue card |
| 2 | Modified car logo legality | 19.2 | Personalized modification restrictions |
| 3 | Car logo double-sided tape selection | 15.7 | 3M glue vs ordinary glue |
| 4 | Emergency treatment for vehicle logo falling off | 12.3 | Temporary fixation method |
| 5 | Car logo cleaning and maintenance | 9.8 | Chrome plated parts maintenance tips |
2. Detailed explanation of vehicle logo affixing specifications
1. Location requirements
According to the Implementation Regulations of the Road Traffic Safety Law:
| car model | Prefix position | suffix position | Highly demanding |
|---|---|---|---|
| car | Centered in the middle net | Tailgate centered | 0.9-1.2 meters above the ground |
| SUV | Above in China Open | Left side of tailgate | 1.0-1.5 meters above the ground |
| New energy vehicles | Green card fixed position | Green card fixed position | Do not block the charging port |
2. Paste material selection
| Glue type | Applicable scenarios | Durability | price range |
|---|---|---|---|
| 3M VHB tape | Metal/plastic substrate | 3-5 years | 15-30 yuan/meter |
| Epoxy resin glue | Surface pasting | More than 5 years | 40-60 yuan/piece |
| Nano traceless glue | temporary fixation | 1-2 years | 10-20 yuan/piece |
3. Step-by-step pasting guide
Step 1: Surface treatment
Use alcohol cotton pads to clean the pasting area to ensure there is no oil or dust. It is recommended to lightly polish the metal surface with 800-grit sandpaper.
Step 2: Positioning Measurement
It is recommended to use a laser level for positioning. Ordinary car owners can use a tape measure to measure. The error should be controlled within ±5mm.
Step 3: Glue Construction
| Glue type | Curing time | pressure requirements | Things to note |
|---|---|---|---|
| Double sided tape | Instant | Press for 30 seconds | Release paper needs to be removed |
| liquid glue | 24 hours | Clamp fixation | Avoid glue spillage |
4. Warning on cases of violation and punishment
Recent cases of violations investigated and dealt with in many places:
| Violation type | Penalty amount | Points deducted | Typical cases |
|---|---|---|---|
| Cover the original factory logo | 200 yuan | None | A car owner covered the Mercedes-Benz logo with stickers |
| Changing the label without authorization | 500 yuan | 3 points | BYD changes Lexus logo |
| Position offset | 100 yuan | None | The rear logo is affixed to the bumper |
5. Professional advice
1. It is recommended to choose the original factory-specified pasting solution and keep the construction documents for annual inspection.
2. Construction in winter needs to be carried out in an environment above 10°C. In summer, avoid exposure to the sun and stick it on immediately.
3. Modified vehicle logos must be reported to the vehicle management office for change registration 10 working days in advance.
Through the above structured data and operation guide, we hope to help you complete the vehicle logo pasting in a compliant and beautiful manner. If you want to know more, you can follow the recent hot topics such as #CarLogoDIYChallenge# to get the latest tips.
check the details
check the details
en
